PowerScale OneFS Web Administration Guide

Modify ports

You can modify already configured HTTPS and HTTP ports.

1. Click Protocols > Objects Storage (S3) .
2. Click the Global settings tab.
   The Global settings page appears.
3. Under the View/Edit Settings area, select the Enable S3 HTTP check box to enable S3 HTTP support.
   If the Enable S3 HTTP is clear, only S3 HTTPS is supported.
4. Modify the port details. The default values for the ports are:
   • HTTPS: 9021
   • HTTP: 9020
   You can modify the value for both the ports. Click the arrows inside the box or enter a value in the box.
   Click Revert changes to go back to previous settings. Revert changes is enabled only if any changes are made.
5. Click Save changes.
   Save changes is enabled only if you have modified the settings.
   The changes are saved, and the following message appears.

   Updated S3 global settings.
   S3 global settings has been updated successfully.