Latitude 7390 2-in-1 Owner's Manual

Installing keyboard assembly

1. Align the keyboard assembly with the screw holders on the chassis.
2. Replace the 13 (M2.0 x 3.0) screws that secure the keyboard to the chassis.
3. Affix and connect the keyboard and the backlit keyboard cables to the keyboard.
4. Affix the LED board cable on the keyboard.
5. Affix the SSD thermal pad on the SSD module.

   NOTE: : If your computer has a WWAN card, then SIM card tray installation is a requirement.

6. Install the:
   1. System baord
   2. Heatsink module
   3. WWAN card
   4. WLAN card
   5. SSD card
   6. Battery
   7. Base cover
   8. SIM card tray
   9. Micro SD

      NOTE: : To install both cards if equipped.

7. Follow the procedure in After working inside your computer.