OpenManage Enterprise Power Manager RESTful API Guide version 1.2

POST method to Enable EPR

This method enables EPR on the specified target.

Description

Enables EPR on the specified target

Privilege

DEVICE_CONFIGURATION

HTTP response codes

200

Example

Input:
{
  "Target": 10149,
  "Action": "POWER_THROTTLE"
}

Output:
{
  "Id": 7
}

Table 1. AttributesThis table lists the attributes that this method supports.
Attribute Name	Description
Target	Device Id or Group Id on which EPR is to be applied.
Action	EPR action (POWER_THROTTLE or POWER_OFF)
Id	Id of the created EPR.

NOTE: EPR can be applied to single device or single group at a time.