Dell EMC OpenManage Integration Version 1.1.0 with Microsoft Windows Admin Center Installation Guide

Compatibility matrix

Table 1. Compatibility matrixThe following table lists the supported Microsoft Windows Admin Center version, browser, operating system, supported software, and supported hardware.
Supported software and hardware Version
Microsoft Windows Admin Center 1910.2 GA release. For more information, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center.
Operating systems For more information about the supported OSs for installing Microsoft Windows Admin Center and different modes of installation, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center.
NOTE: To view the update compliance details of the devices by using OpenManage Integration with Windows Admin Center, the supported OSs are Microsoft Windows 2012 R2 and later.
Browsers For more information about the supported browsers by Microsoft Windows Admin Center, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center.
Dell EMC System Update Utility (DSU) 1.8.1

The Systems-Management_Application_DVHNP_WN64_1.8.1_A00.EXE DSU file can be downloaded from here.

Dell EMC Inventory Collector (IC) The supported version of IC can be downloaded from here.
Dell EMC Repository Manager (DRM) 3.3

The supported version of DRM can be downloaded from here.

PowerEdge servers as target nodes.

For more information on the generic naming convention of PowerEdge servers, see Identifying the generation of your Dell EMC PowerEdge server.

YX2X and YX3X models of PowerEdge servers with iDRAC7 and iDRAC8 respectively (Recommended firmware version of 2.60.60.60 or later).
NOTE:
  • For PowerEdge servers with firmware versions lesser than 2.60.60.60, information of hardware inventory and health status of few components might not be available. For more information about the components for which the information is not available, see Dell EMC OpenManage Integration with Microsoft Windows Admin Center User's Guide.
  • In YX2X and YX3X models of PowerEdge servers, following features are not available:
    • Cluster-Aware Updating
    • Health and Inventory information of Accelerators
YX4X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.30.30.30 or later).
YX5X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.40.40.40 or later).
Azure Stack HCI as target nodes AX-640, AX-6515, and AX-740xd Dell EMC Solutions for Microsoft Azure Stack HCI.
Supported Storage Spaces Direct Ready Nodes as target nodes R440 ,R640,R740xd and R740xd2 Dell EMC Solutions for Microsoft Azure Stack HCI.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\