Dell EMC OpenManage Integration Version 2.0 with Microsoft Windows Admin Center Installation Guide

PDF

Compatibility matrix

The following table lists the supported Microsoft Windows Admin Center version, browser, operating system, supported software, and supported hardware required for OMIMSWAC.

Table 1. Compatibility matrix
Supported software and hardware	Version
Microsoft Windows Admin Center	Windows Admin Center 2103.2 GA. Microsoft recommends to use the latest version of the Windows Admin Center. For more information, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center.
Microsoft Cluster Creation Extension	1.556.0.nupkg release.
Microsoft Failover Cluster Tool Extension	1.280.0.nupkg release.
Operating systems	For more information about the supported OSs for installing Microsoft Windows Admin Center and different modes of installation, see the Microsoft Windows Admin Center documentation at https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/plan/installation-options. NOTE To view the update compliance details of the devices by using OpenManage Integration with Windows Admin Center, the supported OSs are Microsoft Windows 2012 R2 and later. Also, supports managing and monitoring of Azure Stack HCI solution based on the new Azure Stack HCI version 20H2 operating system.
Browsers	For more information about the supported browsers by Microsoft Windows Admin Center, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloud-platform/windows-admin-center.
Dell EMC System Update Utility (DSU)	1.9.0 The Systems-Management_Application_8CTK7_WN64_1.9.0_A00.EXE DSU file can be downloaded from here.
Dell EMC Inventory Collector (IC)	20_09_200_921_A00 The supported version of IC can be downloaded from here.
Dell EMC Repository Manager (DRM)	3.3.1 The supported version of DRM can be downloaded from here.
PowerEdge servers as target nodes. For more information on the generic naming convention of PowerEdge servers, see Identifying the generation of your Dell EMC PowerEdge server.	YX2X and YX3X models of PowerEdge servers with iDRAC7 and iDRAC8 respectively (Recommended firmware version of 2.60.60.60 or later). NOTE For PowerEdge servers with firmware versions lesser than 2.60.60.60, information of hardware inventory and health status of few components might not be available. For more information about the components for which the information is not available, see Dell EMC OpenManage Integration with Microsoft Windows Admin Center User's Guide. In YX2X and YX3X models of PowerEdge servers, following features are not available: Cluster-Aware Updating Health and Inventory information of Accelerators YX4X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.30.30.30 or later). YX5X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.40.40.40 or later). PowerEdge XE2420 Edge server (Recommended iDRAC firmware 4.00.129.00 or later).
Supported AX nodes (running Azure Stack HCI version 20H2 operating system) as target nodes for Dell EMC Integrated System for Microsoft Azure Stack HCI	AX-640, AX-740xd , AX-6515, and AX-7525 NOTE Integrated Cluster Deployment and Update and Full Stack Cluster-Aware Updating features are supported in Dell EMC Integrated System for Microsoft Azure Stack HCI cluster using OpenManage Integration snap-in extension.
Supported AX and/or Storage Spaces Direct Ready Nodes (using Windows Server operating system) as target nodes for Dell EMC HCI Solutions for Microsoft Windows Server	AX nodes: AX-640, AX-740xd , AX-6515, and AX-7525 Storage Spaces Direct Ready Nodes: R440, R640, R740xd, and R740xd2

NOTE Dell EMC OpenManage Integration supports target nodes running Windows Server Core operating system.