Set up Network Time Protocol servers
About this task
You can use Network Time Protocol (NTP) to synchronize the OMIVV appliance clocks to that of an NTP server.
Steps
-
On the
APPLIANCE MANAGEMENT page, click
Edit in the
NTP Settings area.
-
Select
Enabled. Enter the hostname or IP address of a preferred and secondary NTP server and click
Apply.
-
After configuring NTP, start the terminal console and select the
Sychronize date and time over the network check box.
Results
NOTE It might take around 10 minutes for the OMIVV clocks to synchronize with the NTP server.