Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC OpenManage Software Support Matrix Version 9.4

PDF

RAID and non-RAID Controller Supported Servers, Operating Systems, Firmware, and Driver Versions

Starting with OpenManage Server Administrator version 5.0, only the enhanced Storage Management Service is supported. The Storage Management Service allows you to configure and manage your storage devices from within Server Administrator.

NOTE: The Storage Management Service mentioned in this guide refers to the enhanced Storage Management Service. Server Administrator no longer supports the basic Storage Management Service (also known as Array Manager).

Most of the systems management releases support management of RAID controllers in the form of PERC cards, and some systems management releases also support SATA controllers. System administrators responsible for monitoring the compatibility of their systems' storage devices need a clear matrix that shows the elements that are compatible with a particular storage controller. Each storage controller version in turn supports a specific array of elements, including:

  • Version of the Storage Management Service
  • Dell EMC system
  • Firmware version number required for a particular controller
  • Supported operating systems, where each operating system requires a specific driver

For more information on Storage Management Services see the Dell Server Administrator Storage Management User's Guide at www.dell.com/OpenManageManuals.

The following types of controllers are included in this section:

  • The RAID controller card group contains the following controllers: PERC 6E, PERC 6i, SAS 6iR, PERC H200, PERC H310, PERC H330, PERC HBA H330, PERC H700, PERC H710 and H710P, PERC H730 and H730P, PERC H740 and H740P, PERC H800, PERC H810, PERC H830, PERC H840, PERC S110, PERC S130, PERC S140, PERC HBA 330MX, PERC HBA 330MMZ, PERC H730P MX, PERC H745P MX, FD33XS-PERC Single, FD33XD-PERC Dual, FD33XS-HBA 330 Single, FD33XD-HBA 330 Dual, SAS 6 Gbps HBA, SAS 12Gbps HBA, Internal Tape Adapter, and Dell PowerEdge PCIe Express Flash SSD.
  • The RAID controller card group supports the following operating systems: Windows Server 2019, VMware ESXi 6.5 U3, VMware ESXi 6.7 U2, VMware ESXi 6.7 U3, Red Hat Enterprise Linux 7.7, and Red Hat Enterprise Linux 8.1.

NOTE: The supported devices for yx5x generation of PowerEdge servers are PERC H730 and PERC H730P, PERC H740 and PERC H740P, PERC S150, PERC H745 Front,PERC H745 Adapter,PERC H345 Front,PERC H345 Adapter,HBA345 Adp,HBA345 Frnt, SAS12 Gbps, HBA330 PowerEdge PCIe Express Flash SSD. Refer platform supported operating system in earlier sections.

NOTE: The firmware and drivers listed in this section refer to the minimum supported version as of the publication date of this document. Later versions of the firmware and drivers may also be supported or required. For the most recent driver and firmware requirements, see www.dell.com/OpenManageManuals for the Storage Management Service.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\