- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- M.2 Intel Optane Memory Module 16 GB
- Technology and components
- System setup
- Software
- Troubleshooting your computer
- Technical specifications
- Contacting Dell
Option | Description |
Multi Core Support | This field specifies whether the process will have one or all cores enabled. This option is enabled by default. |
Intel SpeedStep | Allows you to enable or disable the Intel SpeedStep mode of the processor. This option is enabled by default. |
C States Control | Allows you to enable or disable additional processor sleep states. This option is enabled by default. |
Limited CPUID Value | Allows you to limit the maximum value of the processor standard CPUID function. This options is disable by default. |
Intel TurboBoost | Allows you to enable or disable the Intel TurboBoost mode of the processor. This option is enabled by default. |
Option | Description |
---|---|
USB provision | This option is not selected by default. |
MEBx Hotkey | This option is selected by default. |
Option | Description |
---|---|
Virtualization | This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel® Virtualization Technology. Enable Intel Virtualization Technology - This option is disabled by default. |
Option | Description |
---|---|
Wireless Device Enable | Allows you to enable or disable the internal wireless devices. All the options are enabled by default. |
Option | Description |
---|---|
Service Tag | Displays the Service Tag of your computer. |
Asset Tag | Allows you to create a system asset tag if an asset tag is not already set. This option is set by default. |
SERR Messages | Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled. |
BIOS Downgrade | Allows you to control flashing of the system firmware to the previous versions. This option is enabled by default. |
Data Wipe | Allows you to securely erase the data from all the available internal storages, such as HDD, SSD, mSATA, and eMMC. The option Wipe on Next Boot is disabled by default. |
BIOS recovery | Allows you to recover the corrupted BIOS conditions from the recovery files on the primary hard drive. The option BIOS Recovery from Hard Drive is selected by default |