Dell OptiPlex 5070 Small Form Factor Service Manual

Installing the optical drive

1. Slide the optical drive into its slot in the system [1].
2. Slide the release tab to unlock the hard drive and optical drive module [2].
   
3. Lift the hard drive and optical module [1], connect the optical drive data cable and power cable to the connectors on the optical drive [2, 3].
   
4. Connect the hard drive data cable and hard drive power cable to the connectors on the hard drive [1,2].
   
5. Slide the release tab to lock the module [2].
   
6. Install the:
   1. Front bezel
   2. Side cover
7. Follow the procedure in After working inside your computer.