- Notes, cautions, and warnings
- Working on your computer
- Disassembly and reassembly
- Software
- System setup
- Troubleshooting
- Getting help
Option | Description |
---|---|
AC Recovery | Determines how the system responds when AC power is re-applied after a power loss. You can set the AC Recovery to:
|
Enable Intel Speed Shift Technology | Allows you to enable or disable Intel Speed Shift Technology support. The option Enable Intel Speed Shift Technology is set by default. |
Auto On Time | Sets time to automatically turn on the computer. Time is kept in standard 12-hour format (hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM fields.
NOTE This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if
Auto Power is set to disabled.
|
Deep Sleep Control | Allows you to define the controls when Deep Sleep is enabled.
This option is Enabled in S4 and S5 by default |
USB Wake Support | Allows you to enable the USB devices to wake the computer from standby mode. The option Enable USB Wake Support is selected by default. |
Wake on LAN/WWAN | This option allows the computer to power up from the off state when triggered by a special LAN signal. This feature only works when the computer is connected to AC power supply.
|
Block Sleep | Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default. |