- Notes, cautions, and warnings
- Overview
- Technical specifications
- Getting started with NVMe PCIe SSD
- Replacing and configuring hardware
- Booting from NVMe PCIe SSD
- Configuring
and managing your NVMe PCIe SSD 2.5 inch SFF device
- OpenManage Server Administrator
- Human Interface Infrastructure configuration utility
- Troubleshooting
- Self-Monitoring Analysis and Reporting Technology errors
- NVMe PCIe SSD Carrier LED indicators
- Ungraceful system shutdown or power loss
- General errors
- NVMe PCIe SSD is not listed in the operating system
- Linux fails to boot and prompts for the root password
- I/O device error on write to NVMe PCIe SSD
- NVMe PCIe SSD performance measurement not optimal
- In Windows Server, OpenManage Server Administrator does not detect PCIe NVMe devices
- System becomes unresponsive when NVMe PCIe SSD is surprise removed
- System becomes unresponsive or crashes when NVMe PCIe SSD is inserted
- System is unable to inventory or manage NVMe PCIe SSDs from HII utility
- Getting help
Dell PowerEdge Express Flash NVMe PCIe SSD SFF P4500/P4600 User’s Guide
Configure and manage NVMe PCIe SSD 2.5 inch SFF
Use the Physical Device Properties screen to view information about NVMe PCIe SSD 2.5 inch SFF and to run a NVMe PCIe SSD 2.5 inch SFF task.
To view the
complete set of NVMe PCIe SSD 2.5 inch SFF properties, select
Full View from the
Options taskbar.
Physical device properties are described below:
- Name
- Displays the name of the NVMe PCIe SSD. The name comprises the bay ID and the slot ID in which the NVMe PCIe SSD 2.5 inch SFF is installed.
- State
- Displays the current state of the NVMe PCIe SSD 2.5 inch SFF.
- Bus Protocol
- Displays the technology that the NVMe PCIe SSD 2.5 inch SFF is using.
- Device Name
- In Windows:
\\.\PhysicalDriveX.
In Linux: /dev/nvmeXn1.
- Media
- Displays the media type of the physical SSD.
- Remaining Rated Write Endurance
- Displays the warranted wear out level of the NVMe PCIe SSD (in percentage).
- Firmware Revision
- Displays the current running firmware version on the NVMe PCIe SSD.
- Driver Version
- Displays the current running driver version of the NVMe PCIe SSD.
- Model Number
- Displays the Piece Part Identification (PPID) of the NVMe PCIe SSD.
- Capacity
- Displays the full capacity of the device.
- Vendor ID
- Displays the hardware vendor of the device.
- Product ID
- Displays the product ID of the device.
- Serial No.
- Displays the serial number of the device.
- PCIe Negotiated Link Speed
- Displays the speed of data transfer that the device negotiated upon initial communication. This speed is dependent on the speed of the device.
- PCIe Maximum Link Speed
- Displays the highest possible speed at which the device can transfer data.
- PCIe Maximum Link Width
- Displays the link width of the device.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\