Dell PowerEdge Express Flash NVMe PCIe SSD SFF P4500/P4600 User’s Guide

Technical specifications

NOTE: The specifications provided are for information purposes only and do not constitute an extension of Dell's warranty for this product.

Table 1. Technical specifications. Technical specifications
Features	Description
NAND type	Triple-Level Cell (P4500/P4600)
Hot swappable	Yes
Embedded data protection enabled	Yes
Device write cache	Yes
Bootable device	Yes (UEFI boot starting on select 13th Generation PowerEdge systems)
Self-monitoring enabled	Yes
Offline data retention	Up to three months after total bytes written reaches 100%

General
Model	P4500/P4600
Device protocol	NVMe
NVMe standard	1.2
Bus protocol	PCIe
Bus protocol version	3.0
Backplane interface	Combo-connector (SFF-8639) NOTE: For more information on the combo-connector, see http://www.ssdformfactor.org.

Physical Dimensions
Height	69.85 mm
Width	15.0 mm
Length	100.45 mm

Device Capacity
Unformatted capacity	P4500: 1TB, 2TB and 4TB P4600: 1.6TB and 3.2TB
User-addressable sectors	1TB: 1,953,525,168 LBAs
	1.6 TB: 3,125,627,568 LBAs
	2TB: 3,907,029,168 LBAs
	3.2 TB: 6,251,233,968 LBAs
	4 TB: 7,814,037,168 LBAs
Bytes per sector	512 Bytes
P4500: 1TB 2TB 4TB
	0.73 DWPD over 5 years
	0.49 DWPD over 5 years
	0.63 DWPD over 5 years
P4600: 1.6TB 3.2TB
	2.92 DWPD over 5 years
	2.92 DWPD over 5 years
Environment
Operating temperature	0 °C to 70 °C
Shock	SFF: 1000 G/0.5 ms
Vibration	2.17 GRMS (Operating), 3.13 GRMS (Non-operating)

Power Requirements
Active power	25 W

Electrical characteristics
Voltage input	3.3 V and 12 V