Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC PowerEdge MX740c Installation and Service Manual

PDF

Installing the mini Mezzanine card

Prerequisites

  1. Follow the safety guidelines listed in Safety Instructions.
  2. Follow the procedure listed in Before working inside the sled.
NOTE The mini Mezzanine card is supported only on systems with two processors.

Steps

  1. Remove the connector cap on the I/O connector of the mini Mezzanine card.
  2. Pull the blue pull tag to raise the lever on the mini Mezzanine card.
  3. Align the mini Mezzanine card connector with the connector on the system board.
  4. Lower the mini Mezzanine card into place, and push the lever down to lock the card in place.
    Figure 1. Installing the mini Mezzanine card
    Installing the mini Mezzanine card
  5. Close the lever on the mini Mezzanine card.

Next steps

  1. Follow the procedure listed in After working inside your sled.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\