Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC PowerEdge MX740c Installation and Service Manual

PDF

Installing the Mezzanine card

Prerequisites

  1. Follow the safety guidelines listed in Safety Instructions.
  2. Follow the procedure listed in Before working inside the sled.
NOTE A dual-processor configuration is required to support the Mezzanine B1 card.

Steps

  1. Align the connector on the Mezzanine card with the connector on the system board.
  2. Place the Mezzanine card on the connector and press the blue touch point until it is firmly seated.
  3. Use the Phillips #2 screwdriver, tighten the captive screws on the Mezzanine card.
    Figure 1. Installing the Mezzanine card
    Installing the Mezzanine card

Next steps

  1. Follow the procedure listed in After working inside your sled.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\