Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC PowerEdge MX740c Installation and Service Manual

System memory

The system supports DDR4 registered DIMMs (RDIMMs), load reduced DIMMs (LRDIMMs), Non-Volatile DIMMs (NVDIMM-Ns), and Intel Optane Data Center Persistent Memory Modules (DCPMMs). System memory holds the instructions that are executed by the processor.

Your system contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into six channels. Six memory channels are allocated to each processor. In each channel, the release tabs of the first socket are marked white, and the second socket black.

Figure 1. System memory layout
The image shows system memory layout

Memory channels are organized as follows:

Table 1. Memory channelsThis tables describes memory channels and how the channels are organized.
Channel Processor 1 Processor 2
0Slots A1 and A7 Slots B1 and B7
1Slots A2 and A8 Slots B2 and B8
2Slots A3 and A9 Slots B3 and B9
3Slots A4 and A10 Slots B4 and B10
4Slots A5 and A11 Slots B5 and B11
5Slots A6 and A12 Slots B6 and B12
Table 2. Memory populationThis table describes the memory population and the operating frequencies.
DIMM Type DIMM Ranking Voltage Operating Frequency (in MT/s)
RDIMM 1R / 2R 1.2 V 2933, 2666
LRDIMM 4R / 8R 1.2 V 2666 , 3200*
NOTE 3200*-Memory speed will be limited to 2933MT/s due to processor limitations.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\