- Notes, cautions, and warnings
- Introduction
- Change list
- NVDIMM-N Overview
- Hardware
- BIOS
- iDRAC NVDIMM-N Management
- Server Behavior with NVDIMM-Ns
- DIMM Configuration Changes
- Windows
- Linux
- ESXi
- General Errata
Press PowerON button on the server
Follow the guidance in Section 4 to setup BIOS.
Enable the Persistence Memory, enable “NVDIMM Interleave”, enable “NVDIMM Read-Only”.
When OS is up and running,
$ su
Mount /dev/pmem0 and /dev/pmem1
# mount -t xfs -o dax /dev/pmem0 /mnt/nvdimm0
To see whether it is writable on /dev/pmem0 and /dev/pmem1
# touch /mnt/nvdimm0/write.txt # shutdown