The PowerEdge R7515 system supports the following AC or DC power supply units (PSU):
Table 1. PSU specificationsThe following table lists the specifications for power supplies:
PSU
Class
Heat dissipation (maximum)
Frequency
Voltage
1600 W AC
Platinum
6000 BTU/hr
50/60 Hz
100—240 V AC, autoranging
1100 W DC
NA
4416 BTU/hr
NA
-48 — -60 V DC
1100 W AC
Platinum
4100 BTU/hr
50/60 Hz
100—240 V AC, autoranging
1100 W HVDC
Platinum
4100 BTU/hr
50/60 Hz
100—240 V AC, autoranging
NA
4100 BTU/hr
NA
200—380 V DC, autoranging
750 W AC
Platinum
2891 BTU/hr
50/60 Hz
100—240 V AC, autoranging
750 W HVDC
Platinum
2891 BTU/hr
50/60 Hz
100—240 V AC, autoranging
Platinum
2891 BTU/hr
NA
240 V DC
750 W AC
Titanium
2843 BTU/hr
50/60 Hz
200—240 V AC, autoranging
495 W AC
Platinum
1908 BTU/hr
50/60 Hz
100—240 V AC, autoranging
NOTE When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system power consumption with the Dell Energy Smart Solution Advisor available at
Dell.com/ESSA.
NOTE Heat dissipation is calculated using the PSU wattage rating.
NOTE This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 230 V.
NOTE If a system with 1600 W AC PSU operates at low line 100-120 V AC, then the power rating per PSU is derated to 800 W.
NOTE If a system with 1100 W AC PSU or 1100 W mixed mode PSU operates at low line 100-120 V AC, and then the power rating per PSU is derated to 1050 W.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\