Dell PowerEdge RAID Controller 9 User’s Guide H330, H730, and H830

Replacing the battery of a PERC FD33xD card

1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
   NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system.
2. Open the system.
3. Locate the PERC card.
4. Remove the PERC card. For more information, see Removing the PERC FD33xD Card.
5. Disconnect the battery cables from the PERC card.
6. Slide the battery carrier in the direction of the arrow printed on the battery carrier, and then flip the battery carrier open.
7. Remove the battery from the PERC card.

   

   1. PECR FD33xD card
   2. battery carrier
   3. battery cable
   4. battery

8. Install the replacement battery on the controller.
9. Push the battery carrier toward the battery and slide the battery carrier till it clicks into place.
10. Connect the battery cables to the PERC card.
11. Replace the PERC card. For more information, see Installing the PERC FD33xD card.
12. Close the system.
13. Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.