Dell EMC PowerEdge T350 Technical Specifications

PDF

PSU specifications

The PowerEdge T350 system supports up to one cabled or two redundant AC power supply units (PSUs).

Table 1. PSU specifications This table describes PSU specifications for the system.
PSU	Class	Heat dissipation (maximum)	Frequency	Voltage	AC		DC	Current
PSU	Class	Heat dissipation (maximum)	Frequency	Voltage	High line 200 - 240 V	Low line 100 - 120 V	DC	Current
450 W AC	Bronze	1871 BTU/hr	50/60 Hz	100 - 240 V, autoranging	450 W	450 W	N/A	6.5 - 3.5 A
600 W AC	Platinum	2250 BTU/hr	50/60 Hz	100 - 240 V, autoranging	600 W	600 W	N/A	7.1 - 3.6 A
600 W Mixed Mode HVDC	N/A	2250 BTU/hr	N/A	240 V	N/A	N/A	600 W	2.9 A

NOTE This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 240 V.

NOTE Heat dissipation is calculated using the PSU wattage rating.

NOTE When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system power consumption with the Enterprise Infrastructure Planning Tool available at Dell.com/calc.