Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge T620 Systems Owner's Manual

Installing The Control Panel—Tower Mode

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Connect the control panel cable, the LCD cable, and the control panel USB cable to the control panel module.
  2. Align and insert the control panel into the control panel slot in the chassis.
  3. Secure the control panel to the chassis using the screw.
  4. Connect the control panel cable, the LCD cable and the control panel USB cable to the system board.
  5. Install the system top cover. See Installing The System Top Cover.
  6. If applicable, replace the cooling fan assembly.
  7. Install the system left side cover. See Installing The System Left Side Cover.
  8. Close the system.
  9. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
  10. If applicable, install the front bezel.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\