Dell PowerStore Hardware Information Guide for PowerStore 1000, 1200, 3000, 3200, 5000, 5200, 7000, 9000, and 9200

The front of the base enclosure contains the following elements:

Table 1. Base enclosure component locations

Location	Description
	NVMe SSD or SCM drives
	NVRAM NVMe drives NOTE:In configurations that only use two NVMe NVRAM drives, slots 21 and 22 must remain empty.
	Base enclosure power on LED
	Drive power and activity LED
	Drive fault LED

Table 2. Base enclosure and drive LEDs

LED	Location	State	Description
Drive fault		Amber	Fault has occurred.
		Off	No fault has occurred.
Drive activity		Blue	Drive activity.
		Off	Drive is powered off.
Base enclosure power and fault		Blue	Power is on. No fault has occurred.
		Amber*	Power is on. Fault has occurred within the enclosure.
		Blue and amber alternating	System uninitialized.
		Off	Power is off.

* Failure of the following components will result in the amber fault state:

• Fan module
• Power supply
• DIMM
• Internal battery backup module
• Node
• Embedded module
• 4-port card
• I/O module
• Internal M.2 boot module
• NVMe NVRAM drive