Dell Precision 7530 Service Manual

Installing the M.2 SSD module

1. To install the M.2 SSD module (Slot 4):
   1. Place the M.2 SSD into its slot in the system [1].
   2. Replace the single (M2.0x3.0) screw to secure the M.2 SSD to the system board [2].
   3. Place the thermal plate above the M.2 SSD module [3].
   4. Replace the single (M2.0x3.0) screw to secure the thermal plate to the M.2 SSD [4].
      NOTE:Repeat the above steps to install other M.2 SSD installed (Slot 3 and 5).

      
      
      
2. Install the:
   1. battery
   2. base cover
      NOTE:Installing of base cover is required only if the M.2 SSD module in slot 3 or 5 are accessed.
   3. SD card
3. Follow the procedure in After working inside your computer.