Secure Connect Gateway 5.x — Application Edition Support Matrix

PDF

PowerVault devices

You must select the device type as Server / Hypervisor to add these devices in secure connect gateway. If a critical hardware issue is detected on these devices, a support case is created for the server on which it is attached. The following PowerVault devices are supported in secure connect gateway:

Table 1. Supported PowerVault devicesThe following table shows supported PowerVault devices:
Model	Latest supported iDRAC firmware version	Collection protocol	Ports used	Support notes
MD1000	—	See Supported servers.	See Supported servers.	Secure connect gateway can also detect hardware issues with these devices if the server to which the storage device is attached is added in secure connect gateway
MD1120	—
MD1200	—
MD1220	—
MD1400	—
MD1420	—
NX200	—			—
NX300	—			—
NX430	—			—
NX440	—			—
NX1950	—			—
NX3000	—			—
NX3230	—			—
NX3240	6.00.00.00			Support for firmware version 6.00.00.00 is based on secure connect gateway compatibility with other firmware versions.
NX3330	—			—
NX3340	6.00.00.00			Support for firmware version 6.00.00.00 is based on secure connect gateway compatibility with other firmware versions.