SmartFabric OS10 provides the following network-based client applications that use TCP and UDP ports on external servers.
Service/application | Port | Description |
---|---|---|
ftp client | TCP/20/21 | Used to get images from the remote server when used for image install. |
ssh client | TCP/22 | Used to get images from the remote server when used for image install or to do an SSH session to the remote server. |
sftp client | TCP/22 | Used to get images from the remote server when used for image installation. |
telnet client | TCP/23 | Used when a Telnet session to a remote server is started from the OS10 switch. |
tacacs client | TCP/49 | Used to authenticate the user credentials when a RADIUS server is configured to authenticate. |
dns client | UDP/53 | Used for resolution of host names. |
tftp client | UDP/69 | Used to get images from the remote server when used for image installation. |
curl/http client | http/80 | Used to get images from the remote server when used for image installation or to do a curl command to the remote server. |
snmp | UDP/161 | Send traps from the SNMP agent to the SNMP manager. You must enable traps for the OS10 switch to send it. |
bgp | TCP/179 | Used to communicate to the BGP peers when BGP is configured on the OS10 switch. |
https client | TCP/TCP6/443 | Used to get images from the remote server when used for image installation or do a HTTPs session to the remote server. |
dhcpv6 relay | UDP6/547 | The DHCPv6 relay process listens on this port. |
radius client | UDP/1812,1813 | Used for RADIUS authentication and authorization communication. |
RADIUS Over TLS | TCP/2083 | Used to communicate with RADIUS server over TLS. |