Rack rails are used to install the SCv2080 storage system into a
rack.
Prerequisites
Use SupportAssist to send diagnostic data to Dell Technical Support.
Shut down the storage system using the Dell
Storage Manager Client.
About this task
NOTE Replacing rack rails
must be performed during a scheduled maintenance window when the Storage Center system is unavailable
to the network.
Steps
Make sure all the cables are labeled.
Disconnect all the cables from the storage system.
Remove the plastic covers from the chassis
ears.
Remove the screws that secure the chassis
to the rack.
Remove the storage system from the
rack rails.
NOTE Do not attempt to the lift the storage system by yourself.
Always have assistance when lifting the storage system. If installed
above the lower 20U of a rack, a customer-provided mechanical lift
must be used to avoid injury.
Remove the rack rails from the rack.
Install the replacement rack rails in the rack.
Install the storage system in the
rack rails.
Start up the storage system and optional expansion enclosure.
Next steps
Use SupportAssist to send
diagnostic data to Dell Technical Support.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\