Use the Management Network page to configure the management network settings for the Storage Center.
Steps
Select how to configure the management network from the Network Configuration Source drop-down menu.
DHCP IPv4 Only – IP addresses are dynamically assigned.
Static – IP addresses must be specified manually.
If the network configuration source is set to Static, specify the management network settings in the following fields:
Management IPv4 Settings
Type the IPv4 management address
for the Storage Center in the Virtual Address field.
The IPv4 management address is the IP address that is used
to manage the Storage Center and
it is different than the IPv4 management address of the storage controllers.
Type a IPv4 management address for each storage controller in the associated fields.
Type the IPv4 subnet mask of the management network
in the Subnet Mask field.
Type the IPv4 gateway address of the management
network in the Gateway Address field.
(Optional) Management IPv6 Settings
Type the IPv6 management address
for the Storage Center in the Virtual Address field.
The IPv6 management address is the IP address that is used
to manage the Storage Center and
it is different than the IPv6 management address of the storage controllers.
Type a IPv6 management address for each storage controller in the associated fields.
Type the IPv6 address prefix in the Prefix field.
Type the IPv6 gateway address the Gateway Address field.
Network Settings
Type the domain name of the management network
in the Domain Name field.
Type the DNS server addresses of the management
network in the DNS Server and Secondary
DNS Server fields.
(Optional) Type a secondary DNS server addresses of the management
network in the Secondary
DNS Server fields.
To proceed:
If you are connected to a Data Collector, click Next. The Security page opens.
If you are connected directly to a Storage Center, click Finish. The Configure tab opens.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\