Dell Wyse Enhanced Microsoft Windows Embedded Standard 7P for Dell Latitude 3460 Wyse TC and Dell Latitude E7270 Wyse TC Administrator’s Guide

TightVNC Server starts automatically as a service upon thin client startup. The TightVNC Server service can also be stopped and started by using the Services window.

1. Log in as an administrator.
2. Click Start > Control Panel > Administrative Tools > Services , and then select TightVNC Server.
   • You may also use the TightVNC Server features in Start > All Programs > TightVNC Server (Service Mode)
3. To shadow a thin client from a remote machine use the following guidelines:
   1. On a remote machine on which TightVNC Viewer is installed, open the New Tight VNC Connection dialog box.
   2. Enter the IP address or valid DNS name of the thin client that is shadowed or operated or monitored.
   3. Click OK.

      The VNC Authentication dialog box is displayed.

   4. Enter the Password of the thin client that is shadowed, and then click OK. This is the Primary Password of the thin client that is shadowed.
   The thin client that is shadowed or operated or monitored is displayed for the administrator in a separate window on the remote machine. Use the mouse and keyboard on the remote machine to operate the thin client just as you would if you were operating it locally.