- Notes, cautions, and warnings
- Introduction
- Getting Started
- Notable User Features
- Notable Administrator
Features
- Using Administrative Tools
- Using TPM and BitLocker
- Configuration Manager
- Device Manger: Bluetooth Wireless Connections
- Connecting to a Printer or an External Device
- Display: Dual Monitor Display
- Network and Sharing Center: Wireless Local Area Network (WLAN)Settings
- Realtek HD Audio Manager
- Setting the Region and Language
- Sounds and Audio Devices
- User Accounts
- WDA
- Windows Defender
- Additional Administrator
Utility and Settings Information
- Automatically Launched Utilities
- Utilities Affected by Log Off, Restart, and Shut Down
- Using the File Based Write Filter (FBWF)
- Understanding the NetXClean Utility
- Saving Files and Using Local Drives
- Mapping Network Drives
- Participating in Domains
- Using the Net and Tracert Utilities
- Managing Users and Groups with User Accounts
- Changing the Computer Name of a thin client
- System Administration
- Restoring Default Settings
- Accessing Thin Client BIOS Settings
- Imaging Devices with the Dell Wyse USB Firmware Tool
- Configuring and Using Peripherals
- TightVNC (Server)
- TightVNC (Server) — Pre-requisites
- Using TightVNC to Shadow a Thin Client
- Configuring TightVNC Server Properties on the Thin Client
- Mobile broadband
- Using Dynamic Host Configuration Protocol (DHCP)
Dell Wyse Enhanced Microsoft Windows Embedded Standard 7P for Dell Latitude 3460 Wyse TC and Dell Latitude E7270 Wyse TC Administrator’s Guide
WDA
Dell Wyse Device Agent (WDA) is a unified agent for all thin client management solutions. Installing the WDA on a thin client makes it manageable by Dell Wyse Device Manager (WDM). WDA UI enables user to configure WDM Server. Client can be connected to WDM Server by selecting WDM option from UI and providing mandatory values such as, valid WDM server IP, Port. Use the following guidelines to configure the Dell Wyse Device Manager (WDM) settings:
- Log in as an Administrator.
-
Double-click WDA icon in the system tray of the taskbar.
WDA dialog box is displayed.
-
Click Registration tab on the left corner of the dialog box to register the device.
Device registration screen is displayed.
-
For Automatic setting of the management server, Select Auto discovery from the drop down list.
-
For WDM configure, Select Wyse Device Manager (WDM) from the drop down list.
- Configure the Server settings:
- Type the IP Address, or Fully Qualified Domain Name (FQDN) of the WDM server.
-
Click the ON/OFF button to enable the HTTP option. Enter the Port to use, the default port value is 80
-
Click the ON/OFF button to enable the HTTPS option. Enter the Secure Port to use, the default port value is 443. (Optional)
-
Configure the Discovery settings:
- Click the ON/OFF button to Enable all discovery methods . If you want to enable all of the following methods — they are used if they are configured. For more information on setting up the discovery options, see WDM Installation Guide.
- Click the ON/OFF button to enable the DNS Hostname . This allow devices to use the DNS Hostname lookup method to discover a WDM Server.
-
Click the ON/OFF button to enable the DNS SRV record lookup. This allow devices to use the DNS SRV record lookup method to discover a WDM Server.
-
Click the ON/OFF button to enable the DHCP Option Tags. This allow devices to use DHCP option tags to discover a WDM Server.
-
Click the ON/OFF button to enable the Manual discover from WDM, if no Dynamic Discovery method is used. WDM Agents respond to the server discovery by storing the discovered Web Server IP address and port and begin regular check-ins.
-
Enter the number of Missed check-ins after which you want the auto-discovery options enabled.
- Click Register.
- Configure the Server settings:
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\