Dell Wyse ThinOS Version 8.6 and ThinOS Lite 2.6 Operating System Release Notes

PDF

INI parameters

Table 1. INI parametersINI parameters
Usage	Description
wakeonusb=[yes,no]	This parameter enables or disables wake up from suspend state by using usb. The only limitation is that the USB devices must connect to root hub.
OsdRepeatRate={0,1,2}	This feature is only supported on the Wyse 5470 All-in-One Thin Client. This feature is designed to increase the speed of the OSD button used for adjusting the brightness of the screen. The value ranges from 0-2, for example, the parameter value is set to 0 which is default, it takes 20 seconds to adjust the brightness of the screen from 0 to 100. If the value is set to 2, it will take 10 seconds to adjust the brightness of the screen from 1 to 100.
OsdRepeatDelay={0,1,2}	This feature is only supported on the Wyse 5470 All-in-One Thin Client. This feature is designed to decrease the speed of the OSD button used for adjusting the brightness of the screen. The value ranges from 0-2, for example, the parameter value is set to 0 which is default, it takes 20 seconds to adjust the brightness of the screen from 0 to 100. If the value is set to 2, it will take 50 seconds to adjust the brightness of the screen from 1 to 100.
EnableSecondaryPort =[yes,no,1,0]	This parameter enables the secondary port. The INI parameter has to be set to 1 or yes to enable the secondary audio port which is present on the back of the Dell WD19 docking station port and disables the front one.
[TrackpadDisableOnType={yes, no}]	This parameter is available only for the Dell Wyse 5470 Thin Client. This option disables the trackpad while typing. The default INI parameter is set to no. This parameter can be enabled by changing the INI parameter to Yes.
[TouchScreenDisable={yes, no}]	This parameter is available only for the Dell Wyse 5470 Thin Client. The parameter allows you to disable the touchscreen of the Dell 5470 Thin Client. By default the value is set to no.