Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Wyse ThinOS Version 8.6 and ThinOS Lite 2.6 Operating System Release Notes

PDF

PCoIP connections using Teradici Remote Workstation card

In ThinOS version 8.6, you can directly configure the PCoIP connection after you connect either the TERA2240 Remote Workstation card or TERA2220 Remote Workstation card. This feature only works with the direct PCoIP connection, and does not work when you connect using the Horizon View broker.

NOTE: The host card version must match the Teradici PCoIP SDK version 2.9. The SDK in ThinOS does not function similar to Teradici zero client firmware. For example, the SDK in ThinOS does not support USB redirection with the host card connection. This feature is mainly for workstation users working on the server remotely.

The following table lists the supported platforms and the corresponding maximum displays that are tested for TERA2220 and TERA2240 host cards:

Table 1. Support matrix—For reference onlySupport matrix
Platform ThinOS ThinOS with PCoIP Maximum displays for TERA2220 host card Maximum displays for TERA2240 host card
Wyse 5070 thin client—Celeron Not supported Supported 2—with 2560 x 1440 resolution 2—with 2560 x 1440 resolution
Wyse 5070 thin client—Pentium Not supported Supported 2—with 2560 x 1440 resolution 2—with 2560 x 1440 resolution
Wyse 5070 Extended thin client Not supported Supported 2—with 2560 x 1440 resolution 4—with 1920 x 1200 resolution
Wyse 3040 thin client Not supported Supported 2—with 2560 x 1440 resolution 2—the resolution depends on your display setup
Wyse 5060 thin client Not supported Supported 2—with 2560 x 1440 resolution 2—with 2560 x 1440 resolution
Wyse 5010 thin client Not supported Supported 2—with 1920 x 1200 resolution 2—with 1920 x 1200 resolution
Wyse 5040 AIO thin client Not supported Supported 2—with 1920 x 1200 resolution 2—with 1920 x 1200 resolution
Wyse 3030 LT thin client Not supported Supported 2—with 2560 x 1440 resolution 2—the resolution depends on your display setup
Wyse 7010 thin client Not supported Not supported Not supported Not supported
Wyse 3020 thin client Not supported Not supported Not supported Not supported
Wyse 3010 thin client Not supported Not supported Not supported Not supported
Table 2. Teradici support matrixTeradici support matrix
Display typeMaximum number of displaysTeradici PCoIP processorMaximum resolution
Dual display2TERA2220Single display with 2560 x 1600 resolution or two displays with 1920 x 1200 resolution
Quad display4TERA22402 displays with 2560 x 1600 resolution or four displays with 1920 x 1200 resolution

The following table provides performance data statistics for host card TERA2240 on Wyse 5070 thin client with Celeron processor:

Table 3. Performance data statisticsPerformance data statistics
Number of displayMaximum rate defined by user (Mbps)Input change rate (Mbps)Output process rateMaximum Tx bandwidth (Mbps)
130302250
30302150
605922101
605930105
230301183
30301050
605711135
60579185

For information about configuring PCoIP Direct Connect, see the Dell Wyse ThinOS Version 8.6 Administrator's Guide at www.dell.com/support.

NOTE: The TERA2220 host card is tested on the workstation Dell Precision 5820 Tower with graphics card NVIDIA Quadro P2000.
Host card reference documents on Teradici official website:

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\