Configuring
the DHCP options settings
To configure
the options settings:
- From the desktop menu, click System Setup, and then click Network Setup.
The Network Setup dialog box is displayed.
- Click the Options tab, and use the
following guidelines:
- DHCP Option IDs — Enter the supported
DHCP options. Each value can only be used once and must be between 128 and 254.
- Interpret DHCP Vendor-Specific Info — Select this check box for automatic interpretation of the vendor
information.
- DHCP Vendor ID — Shows the DHCP
Vendor ID when the dynamically allocated over DHCP/BOOTP option is
selected.
- DHCP UserClass ID — Shows the DHCP
UserClass ID when the dynamically allocated over DHCP/BOOTP option
is selected.
- Click OK to save the settings.
Data is not available for the Topic