Dell Wyse USB Imaging Tool Version 3.5.0 Release Notes

Important notes

• After configuring the USB drives for pull/push operation, it is recommended to remove the USB drives by selecting Eject USB from the System Tray.
• Cloning is supported with the symmetrical USB drives. For example, you can clone a fixed type USB drive to another fixed type USB drive, and removable type USB drive to another removable type USB drive. If you want to clone a fixed type USB drive to a removable type USB drive, or vice versa, then the cloning operation might not work.
• Images registered or added using earlier versions of USB Imaging Tool such as 1.x or 2.x are not recognized by USB Imaging Tool v3.5.0. To work around this issue:
  1. Back up the images from the USB drive.
  2. Update the Merlin version and reregister the images from the backed-up location to the USB drive using the USB Imaging Tool 3.5.0.
• It is recommended that you to set up the backup folder with read and write permission for USB Imaging Tool. If the backup folder is read only, then the Format and Update option in the USB Imaging Tool fails to configure the USB drives.
• In a single session, you cannot configure a local image and a network image path simultaneously.
• You cannot add the same network operating system image path with different file transfer protocols, such as, FTP, HTTP, HTTPS, or CIFS.
• You cannot add the same operating system image, either local or network, with .rsp and .xml files.