Dell Wyse USB Imaging Tool Version 3.1.0 User’s Guide

Cloning a USB drive

You can clone or duplicate a configured USB drive that is currently ready to push an image. Clone operation can be performed only when you have a configured USB drive for a push operation or you have a valid image. You can create as many clones or duplicates as you need to simultaneously perform the push operation on multiple devices at the same time.

1. Plug in a USB drive that is configured for a push operation to the system running USB Imaging Tool.
2. Plug in another USB drive for which you want to replicate the source USB drive.
3. Start USB Imaging Tool and click Image Clone.
   The Image Clone page is displayed.
4. From the Available drive drop-down list, select the configured USB drive.
   • Local—The local images stored in the source USB drive are displayed in the table.

     

   • Network—The network images stored in the source USB drive are displayed in the table.

     

5. Select the target USB drive from the Destination USB Drive drop-down list.
6. Click Configure USB Drive.
   USB Imaging Tool formats the destination USB drive, and then copies the necessary boot loader files based on the OS architecture configured in the source drive. The tool copies the OS Images from the source drive to destination drive.
   The overall progress is displayed on the progress bar.