Dell Wyse USB Imaging Tool Version 3.1.0 User’s Guide

Using Dell Wyse USB Imaging Tool

Dell Wyse USB Imaging Tool enables you to prepare USB keys to perform various operations on source and target thin client devices. The tasks that you can perform are:

• Image Pull—Enables you to prepare the USB key to pull an operating system image or BIOS configuration including CMOS settings from a source device

• Image Push—Enables you to prepare the USB key to push an operating system image or BIOS configuration to a target device.

  The Image Push tab allows you to either push a local image or a network image to the target device.

• Clone USB—Enables you to create a copy of a configured USB key that is configured for the pull or push operation.

• Configure Backup Path—Enables you to set the backup path to back up the contents of a USB key.

After you plug a USB drive to the thin client and start Dell Wyse USB Imaging Tool, the following screen is displayed. The number of USB drives that are connected to your thin client are displayed on the Home screen.

To view the USB drives, click USB Drives in the left pane.