Dell ThinOS 9.1.4097, 9.1.4234, 9.1.5067, and 9.1.6108 Administrator’s Guide

Configure the General Options

1. From the desktop menu, click System Setup > Remote Connections.
   The Remote Connections dialog box is displayed.
2. Click the General Options tab, and do the following:

   

   1. Click one of the following options to set the action that the thin client should perform after you exit all sessions:
      • None—By default, None is selected and the thin client automatically returns to the terminal desktop.
      • Sign-off automatically
      • Shutdown the system automatically—If you select this option, you must specify a time period after which the thin client shuts down.
      • Restart the system automatically—If you select this option, you must specify a time period after which the thin client restarts.
      NOTE:You can enable or disable the privilege to cancel shutdown or restart. From the Wyse Management Suite policy settings or Admin Policy Tool, go to Advanced > Privacy & Security > Account Privileges > Previlige Level, and select Customize from the drop-down list. Enabled or disable the Allow to Stop Forced Reboot/Shutdown option. If the option is disabled, when all sessions are ended, users cannot click the Cancel button on the reboot or shutdown countdown window to stop the process.
   2. Enter the default username in the Default Sign-on Username field.
   3. Enter the default password in the Default Sign-on password field.
   4. Enter the default domain in the Default Sign-on Domain field.
3. Click OK to save your settings.