Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell ThinOS 9.1.4097, 9.1.4234, 9.1.5067, and 9.1.6108 Administrator’s Guide

PDF

Enable Wacom tablet using the session menu

Steps

  1. On the ThinOS client, launch a PCoIP session.
  2. In system tray, click the PCoIP icon to view the active PCoIP sessions.
  3. Select a session from the menu.
  4. Click Tablet Monitor and select one or more displays. The selected display is mapped to the tablet.
    Table 1. Tablet Monitor settingsTablet Monitor settings
    User scenario ThinOS settings Recommended PCoIP session settings
    Map all displays to the tablet. Click the PCoIP icon, and then click PCoIP session > Table Monitor > Full.
    1. In a PCoIP session, open the Wacom tablet properties window.
    2. Click the Mapping tab.
    3. From the Screen Area drop-down list, select Full.
    Map a specified display to the tablet. Click the PCoIP icon, and then click PCoIP session > Table Monitor > Monitor (x).
    1. In a PCoIP session, open the Wacom tablet properties window.
    2. Click the Mapping tab.
    3. From the Screen Area drop-down list, select your preferred display.
  5. Click Tablet Orientation Left-Handed to set the orientation of the tablet for left-handed use. If enabled, a tick mark is displayed next to the option. The orientation setting applies to all tools and applications. You must rotate your tablet either to the left or to the right based on your selected orientation.
    Table 2. Tablet Orientation settingsTablet Monitor settings
    User scenario ThinOS settings Recommended PCoIP session settings
    Right-handed tablet orientation.
    • Click the PCoIP icon and select the PCoIP session.
    • Clear the Tablet Orientation Left-Handed selection.
    1. In a PCoIP session, open the Wacom tablet properties window.
    2. Click the Mapping tab.
    3. From the Orientation drop-down list, select ExpressKeys Left.
    Left-handed tablet orientation.
    • Click the PCoIP icon and select the PCoIP session.
    • Select the Tablet Orientation Left-Handed option.
    1. In a PCoIP session, open the Wacom tablet properties window.
    2. Click the Mapping tab.
    3. From the Orientation drop-down list, select ExpressKeys Right.

Next steps

Configure the Wacom tablet mode using Admin Policy Tool or Wyse Management Suite. See, Configure the Wacom tablet mode.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\