Dell Wyse Management Suite Version 1.3 Administrator’s Guide

ICA Browsing Protocol

Select this option to set the default browsing protocol.

Browser IP

Enter the browser IP address.

Store Name

Select this option to specify the store name.

Domain Name

Enter the domain name.

PN Desktop Setup (Show All Application)

Select this option to enable the PN desktop setup. When this option is enabled, all the published applications are displayed on the desktop.

Enable Multimedia Redirection (MMR)

Select this option to enable the Multimedia Redirection.

Enable H.264 Decoding Support

Select this option to enable the H.264 decoding support for the ICA connections.

HDX Webcam Frame Rate

Select this option to set the preferred frame rate for the HDX Webcam.

HDX Webcam Image Width

Select this option to set the width of image request from the HDX Webcam.

HDX Webcam Image Height

Select this option to set the height of image request from the HDX Webcam.

Audio Bandwidth Limit

Enable UDP Audio

Select this option to enable the transport of audio data through UDP.

Flash Redirection Policy

Select this option to set the Flash Redirection policy. From the drop-down menu, select either allow or deny the Flash Redirection policy.

Transparent Key Passthrough

Select this option to determine how the mapping of certain key combinations is used when connecting to ICA sessions.

Use Alternate Address

Select this option to use an alternate IP address from the ICA master browser to pass firewalls.

ICA Proxy Type

Select this option to choose the proxy type for the ICA connection. The default value is None.

Allow USB Redirection of devices plugged in before ICA Session start

Select this option to set the ICA Desktop Appliance Mode. This option allows the USB redirection of the devices plugged in before the ICA session starts.

Enable USB Redirection

Select this option to enable the Citrix USB redirection to all the devices.

You can specify which devices and device families can be allowed or denied through the USB redirection policy in to the Citrix sessions.

Enable ICA Dynamic Drive Mapping

Select this option to enable the Double ICA Dynamic Drive Mapping. If this option is disabled, you can add the individual drives for various drive types. As a result, only individual drives are redirected in to the ICA session.

Enable USB Redirection

Select this option to enable VMware USB Redirection to all the devices.

You can specify which devices and device families can be allowed or denied through the USB redirection policy in to the VMware sessions.