Dell Wyse Management Suite Version 1.3 Administrator’s Guide

PDF

Configuring Microsoft RDP connection settings

Use the Microsoft RDP Settings page to configure the Microsoft RDP connection settings for ThinOS 8.5 and later version devices.

Table 1. Configuring basic settingsBasic settings
Option	Description
Enable NLA	Select this option to enable Network Level Authentication. User authentication is required to establish a connection with the server.
Enable Recording	Select this option to enable recording.

Table 2. Configuring RDP8 settingsRDP8 settings
Option	Description
Bitmap Codec RemoteFX	Select this option to enable the RemoteFX Bitmap Codec option. The default value is yes. Dell recommends that you select No for Wyse 3010 thin clients and Wyse 3020 thin clients.
Enable TS MM	Select this option to enable multimedia redirection for terminal server.
Force Span	Select this option to enable the force span of the view. If you enable the span option, the remote desktop becomes a rectangle which equals to the area of your local monitors.
RemoteFX graphic channel	Select this option to enable RemoteFX graphic channel.
UDP Traffic Channel	Select this option to enable RDP 8 UDP traffic channel. The default value is yes.
Video Optimized VOR	Select this option to enable RDP 8 video optimized redirection. The default value is yes.

Table 3. Configuring advanced settingsAdvanced settings
Option	Description
USB Redirection Technology	Select this option to enable USB redirection. USB redirection is a technology that allows you to access the USB devices that are connected to the thin client from within a remote desktop or application. You can either select VMware PCoIP or Wyse Thin Client Extensions (TCX) USB redirection. NOTE: If you select the TCX USB Redirection option, you require an additional TCX Server Suite.
Color Depth	Select this option to configure the features of an RDP protocol.
Maximum Bitmap Cache	To set the maximum bitmap cache for your RDP session, enter a number from 128 to 1024.
4 Pixel Aligned Session Width	Select this option to enable the 4 pixel aligned session width.
Auto-Detect Network	Select this option to automatically detect the terminal server gateway.
Enable RDP H.264	Select this option to enable the H.264 encoding process for the RDP connections.