The following table lists the valid values for the
DNS SRV records:
Table 1. Configuring
device by using DNS SRV recordThe following table lists the valid values for
the DNS SRV records:
URL/Tag
Description
Record Name—_WMS_MGMT
Record FQDN—_WMS_MGMT._tcp.<Domainname>
Record Type— SRV
This record points to the Wyse
Management Suite server URL. For example, wmsserver.acme.com:443, where wmsserver.acme.com is fully qualified domain name of the
server where Wyse Management Suite is installed. For links to register
your devices in Wyse Management Suite in public cloud, see Getting started with Wyse Management Suite on public cloud.
NOTE: Do not use https://
in the server URL, or the thin client will not register under Wyse
Management Suite.
Record Name—_WMS_MQTT
Record FQDN—_WMS_MQTT._tcp.<Domainname>
Record Type—SRV
This record directs the device
to the Wyse Management Suite Push Notification server (PNS). For a
private cloud installation, the device gets directed to the MQTT service
on the Wyse Management Suite server. For example, wmsservername.domain.com:1883.
To register your devices in Wyse Management
Suite public cloud, the device should point to the PNS (MQTT) servers
in public cloud. For example,
This record is required to register
the ThinOS devices with Wyse Management Suite on public or private
cloud.
This record is optional to register the Windows
Embedded Standard or ThinLinux devices with Wyse Management Suite
on private cloud. If the record is not available, then the devices are
automatically registered to the unmanaged group during on-premise
installation.
Record Name—_WMS_CAVALIDATION
Record FQDN—_WMS_CAVALIDATION._tcp.<Domainname>
Record Type—TEXT
This record is required if Wyse Management
Suite is installed on your system in your private cloud. Do not add
this optional record if you are registering your devices with Wyse Management
Suite on public cloud.
Enter True, if you
have imported the SSL certificates from a well-known authority for
https communication between the client and Wyse Management Suite server.
Enter False , if you have not imported the
SSL certificates from a well-known authority for https communication
between the client and Wyse Management Suite server.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\