XPS 15 2-in-1 Service Manual

Procedure

1. With the display screen facing down, align the screw holes on the display assembly with the screw holes on the palm-rest and keyboard assembly.
2. Replace the six screws (M2.5x4) that secure the display assembly to the palm-rest and keyboard assembly.
   
3. Close the display.
4. Connect the antenna cables to the I/O board.
5. Align the screw holes on the wireless-antenna bracket with the screw holes on the I/O board and replace the two screws (M2x4) that secure the bracket to the I/O board.
6. Connect the display cable to the system board and close the latch.
7. Align the screw holes on the display-cable bracket with the screw holes on the system board and replace the two screws (M1.6x1.8) that secure the bracket to the system board.
8. Adhere the tape that secures the display-cable bracket to the system board.
9. Adhere the camera cable to the palm-rest and keyboard assembly.
10. Connect the camera cable to the system board and close the latch.