Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

Example of the show ip rip database Command to View Learned RIP Routes on Core 3

Core3#show ip rip database
                                 Total number of routes in RIP database: 7
                                 10.11.10.0/24
                                 [120/1] via 10.11.20.2, 00:00:13, TenGigabitEthernet 3/21
                                 10.200.10.0/24
                                 [120/1] via 10.11.20.2, 00:00:13, TenGigabitEthernet 3/21
                                 10.300.10.0/24
                                 [120/1] via 10.11.20.2, 00:00:13, TenGigabitEthernet 3/21
                                 10.11.20.0/24      directly connected,TenGigabitEthernet 3/21
                                 10.11.30.0/24      directly connected,TenGigabitEthernet 3/11
                                 10.0.0.0/8         auto-summary
                                 192.168.1.0/24     directly connected,TenGigabitEthernet 3/43
                                 192.168.1.0/24     auto-summary
                                 192.168.2.0/24     directly connected,TenGigabitEthernet 3/44
                                 192.168.2.0/24     auto-summary
                                 Core3#
                              

Core3#show ip routes
                                 
                                 Codes: C - connected, S - static, R - RIP,
                                 B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
                                 O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
                                 N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
                                 E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
                                 L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
                                 > - non-active route, + - summary route
                                 
                                 Gateway of last resort is not set
                                 Destination    Gateway           Dist/Metric Last Change
                                 ----------- ------- -----------          -----------
                                 R  10.11.10.0/24  via 10.11.20.2, TenGig 3/21   120/1      00:01:14
                                 C  10.11.20.0/24  Direct, TenGig 3/21           0/0        00:01:53
                                 C  10.11.30.0/24  Direct, TenGig 3/11           0/0        00:06:00
                                 R  10.200.10.0/24 via 10.11.20.2, TenGig        3/21 120/1 00:01:14
                                 R  10.300.10.0/24 via 10.11.20.2, TenGig        3/21 120/1 00:01:14
                                 C  192.168.1.0/24 Direct, TenGig                3/43 0/0   00:06:53
                                 C  192.168.2.0/24 Direct, TenGig                3/44 0/0   00:06:26
                                 Core3#
                              

Core3#show ip protocols
                                 
                                 Routing Protocol is "RIP"
                                 Sending updates every 30 seconds, next due in 6
                                 Invalid after 180 seconds, hold down 180, flushed after 240
                                 Output delay 8 milliseconds between packets
                                 Automatic network summarization is in effect
                                 Outgoing filter for all interfaces is
                                 Incoming filter for all interfaces is
                                 Default redistribution metric is 1
                                 Default version control: receive version 2, send version 2
                                 Interface Recv Send
                                 TenGigabitEthernet 3/21 2 2
                                 TenGigabitEthernet 3/11 2 2
                                 TenGigabitEthernet 3/44 2 2
                                 TenGigabitEthernet 3/43 2 2
                                 Routing for Networks:
                                 10.11.20.0
                                 10.11.30.0
                                 192.168.2.0
                                 192.168.1.0
                                 
                                 Routing Information Sources:
                                 Gateway     Distance  Last Update
                                 10.11.20.2  120       00:00:22
                                 
                                 Distance: (default is 120)
                                 
                                 Core3#