Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Filtering BGP Routes

Filtering routes allows you to implement BGP policies.

You can use either IP prefix lists, route maps, AS-PATH ACLs or IP community lists (using a route map) to control which routes the BGP neighbor or peer group accepts and advertises. Prefix lists filter routes based on route and prefix length, while AS-Path ACLs filter routes based on the ASN. Route maps can filter and set conditions, change attributes, and assign update policies.
  • NOTE: The Dell Networking OS supports up to 255 characters in a set community statement inside a route map.
  • NOTE: With the Dell Networking OS, you can create inbound and outbound policies. Each of the commands used for filtering has in and out parameters that you must apply. In the system, the order of preference varies depending on whether the attributes are applied for inbound updates or outbound updates.
For inbound and outbound updates the order of preference is:
  • prefix lists (using the neighbor distribute-list command)
  • AS-PATH ACLs (using the neighbor filter-list command)
  • route maps (using the neighbor route-map command)

Prior to filtering BGP routes, create the prefix list, AS-PATH ACL, or route map.

For configuration information about prefix lists, AS-PATH ACLs, and route maps, refer to Access Control Lists (ACLs) .

  • NOTE: When you configure a new set of BGP policies, to ensure the changes are made, always reset the neighbor or peer group by using the clear ip bgp command in EXEC Privilege mode.

To filter routes using prefix lists, use the following commands.

  1. Create a prefix list and assign it a name. CONFIGURATION mode ip prefix-list prefix-name
  2. Create multiple prefix list filters with a deny or permit action. CONFIG-PREFIX LIST mode seq sequence-number {deny | permit} { any | ip-prefix [ge | le] }
    • ge: minimum prefix length to be matched.
    • le: maximum prefix length to be matched.
    For information about configuring prefix lists, refer to Access Control Lists (ACLs) .
  3. Return to CONFIGURATION mode. CONFIG-PREFIX LIST mode exit
  4. Enter ROUTER BGP mode. CONFIGURATION mode router bgp as-number
  5. Filter routes based on the criteria in the configured prefix list. CONFIG-ROUTER-BGP mode neighbor { ip-address | peer-group-name} distribute-list prefix-list-name {in | out} Configure the following parameters:
    • ip-address or peer-group-name : enter the neighbor’s IP address or the peer group’s name.
    • prefix-list-name : enter the name of a configured prefix list.
    • in: apply the prefix list to inbound routes.
    • out: apply the prefix list to outbound routes.
As a reminder, the following are rules concerning prefix lists:
  • If the prefix list contains no filters, all routes are permitted.
  • If none of the routes match any of the filters in the prefix list, the route is denied. This action is called an implicit deny. (If you want to forward all routes that do not match the prefix list criteria, you must configure a prefix list filter to permit all routes. For example, you could have the following filter as the last filter in your prefix list permit 0.0.0.0/0 le 32).
  • After a route matches a filter, the filter’s action is applied. No additional filters are applied to the route.
To view the BGP configuration, use the show config command in ROUTER BGP mode. To view a prefix list configuration, use the show ip prefix-list detail or show ip prefix-list summary commands in EXEC Privilege mode.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"