Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Modifying Global Parameters

The root bridge sets the values for forward-delay, hello-time, max-age, and max-hops and overwrites the values set on other MSTP bridges.

  • Forward-delay — the amount of time an interface waits in the Listening state and the Learning state before it transitions to the Forwarding state.
  • Hello-time — the time interval in which the bridge sends MSTP bridge protocol data units (BPDUs).
  • Max-age — the length of time the bridge maintains configuration information before it refreshes that information by recomputing the MST topology.
  • Max-hops — the maximum number of hops a BPDU can travel before a receiving switch discards it.
  • NOTE: Dell Networking recommends that only experienced network administrators change MSTP parameters. Poorly planned modification of MSTP parameters can negatively affect network performance.

To change the MSTP parameters, use the following commands on the root bridge.

  1. Change the forward-delay parameter. PROTOCOL MSTP mode forward-delay seconds The range is from 4 to 30. The default is 15 seconds.
  2. Change the hello-time parameter. PROTOCOL MSTP mode hello-time seconds
    • NOTE: With large configurations (especially those configurations with more ports) Dell Networking recommends increasing the hello-time.
    The range is from 1 to 10. The default is 2 seconds.
  3. Change the max-age parameter. PROTOCOL MSTP mode max-age seconds The range is from 6 to 40. The default is 20 seconds.
  4. Change the max-hops parameter. PROTOCOL MSTP mode max-hops number The range is from 1 to 40. The default is 20.

Example of the forward-delay Parameter

To view the current values for MSTP parameters, use the show running-config spanning-tree mstp command from EXEC privilege mode. 
Dell(conf-mstp)#forward-delay 16
                                 Dell(conf-mstp)#exit
                                 Dell(conf)#do show running-config spanning-tree mstp
                                 !
                                 protocol spanning-tree mstp
                                 no disable
                                 name my-mstp-region
                                 MSTI 1 VLAN 100
                                 MSTI 2 VLAN 200-300
                                 
                                 forward-delay 16
                                 MSTI 2 bridge-priority 4096
                                 Dell(conf)#

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"