Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

Specifying The RAC Configuration Variables

The IP address for your target system RAC is set in the sample script as 10.98.8.121 by default. Edit this value to reflect the actual IP address of your target system RAC, if applicable. Additionally, the RAC configuration file used to configure your RAC is set by default to raccfg.ini. If you use the RACCAP.BAT or raccap.sh sample script to generate the raccfg.ini file, there is no need to edit this default setting. If you have made any modifications to the sample scripts or to the suggested directory structure, you must confirm that raccfg.ini is correctly named and that the path is correctly set for your deployment.

To edit the RAC configuration variables, locate the following lines:

In RACCAP.BAT:

set DT_RAC_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\raccfg.ini

In raccap.sh:

DT_RAC_CAPFILE=$dt_systems/$dt_platform/raccfg.ini

To edit the RAC configuration variables, locate the following lines:

In RACREP.BAT:

:: RAC section
                                    set DT_NICCFG=10.98.8.121
                                    set DT_RAC_CAPFILE=%DT_SYSTEMS%\%DT_PLATFORM%\raccfg.ini

In racrep.sh:

# RAC section
                                 DT_NICCFG=10.98.8.121
                                 set DT_RAC_CAPFILE=$dt_systems/$dt_platform/raccfg.ini

Tervetuloa

Tervetuloa Dellin asiakkaaksi

Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

Specifying The RAC Configuration Variables

Arvostele tämä sisältö