- Notes, cautions, and warnings
- Introduction
- Using Lifecycle Controller
- Operating system deployment
- Monitor
- Hardware inventory view and export
- About view and export current inventory
- About view and export factory-shipped inventory
- Viewing hardware inventory — current or factory shipped
- Exporting hardware inventory — current or factory shipped
- Viewing or exporting hardware inventory after part replacement
- Viewing or exporting current inventory after resetting Lifecycle Controller
- Lifecycle Controller log
- Firmware update
- Configure
- System control panel access options
- Configuring iDRAC
- Configuring system time and date
- Configuring RAID
- Configuring RAID using software RAID
- Creating a secure virtual disk on a RAID controller
- Key encryption
- Local key encryption mode
- Breaking mirrored drives
- System setup — Advanced Hardware Configuration
- Collect system inventory on restart
- Configuring local FTP server
- Configuring a local USB drive
- Configuring NFS and CIFS servers
- Conditions while configuring HTTP or HTTPS server
- Maintain
- Platform restore
- Backup server profile
- Export server profile
- Import server profile
- Import server license
- Part replacement configuration
- Repurpose or retire system
- Hardware diagnostics
- SupportAssist Collection
- Easy-to-use system component names
- Using the system setup and boot manager
- Troubleshooting and frequently asked questions
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Profitez de récompenses et de remises réservées aux membres
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Lifecycle Controller Version 3.36.36.36 User's Guide
Integrated devices screen
- Menu Item
- Description
- Integrated RAID Controller
- Allows you to enable or disable the integrated RAID controller. By default, the Integrated RAID Controller option is set to Enabled.
- User Accessible USB Ports
- Allows you enable or disable the user accessible USB ports. Selecting Only Back Ports On disables the front USB ports and selecting All Ports Off disables both front and back USB ports. By default, the User Accessible USB Ports option is set to All Ports On.
- Internal USB Port
- Allows you to enable or disable the internal USB port. By default, the Internal USB Port option is set to On.
- Internal SD Card Port
- Enables or disables the system’s internal SD card port. By default,
the Internal SD Card Port option is set to On.NOTE:This option is displayed only if IDSDM is installed on the system board.
- Internal SD Card Redundancy
- If set to Mirror mode, data is written
on both SD cards. If any one of the SD card fails, data is written
to the active SD card. Data from this card is copied to the replacement
SD card at the next boot. By default, Internal SD Card
Redundancy option is set to Mirror.NOTE:This option is displayed only if IDSDM is installed on the system board.
- Integrated Network Card 1
- Allows you to enable or disable the integrated network card 1. By default, the Integrated Network Card 1 option is set to Enabled.
- OS Watchdog Timer
- Allows you to enable or disable the OS watchdog timer. When this field is enabled, the operating system initializes the timer and the OS watchdog timer helps in recovering the operating system. By default, the OS Watchdog Timer option is set to Disabled.
- Embedded Video Controller
- Allows you to enable or disable the Embedded Video Controller. By default, the embedded video controller is set to Enabled.
- SR-IOV Global Enable
- Allows you to enable or disable the BIOS configuration of Single Root I/O Virtualization (SR-IOV) devices. By default, the SR-IOV Global Enable option is set to Disabled.
- Memory Mapped I/O above 4GB
- Allows you to enable support for PCIe devices that require large amounts of memory. By default, the option is set to Enabled.
- Slot Disablement
- Allows you to enable or disable available PCIe slots on your system.
The Slot Disablement feature controls the configuration
of PCIe cards installed in the specified slot.CAUTION:Slot disablement must be used only when the installed peripheral card is preventing booting into the Operating System or causing delays in system startup. If the slot is disabled, both the Option ROM and UEFI driver are disabled.
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\