Deploy OpenManage Enterprise in VMware vSphere by downloading the virtual machine template from the Dell support site.
Prerequisites
Use a VMware vSphere version that is supported ESXi 6.7 or later versions.
When deploying OpenManage Enterprise on Open Virtualization Format (OVF) specification-based hypervisors, it is recommended to use thick provisioning.
Deploy VMDKs using the supplied OVF template, which is configured with the minimum hardware requirements for running the OpenManage Enterprise appliance.
Ensure that any ESXi to be deployed is disconnected from vCenter.
NOTE: If a secondary adapter is added before powering on the appliance for the first time, the adapter is configured with IPv4 and IPv6 disabled. Upon login to the TUI, and after accepting the EULA and changing the admin password, the adapter will show up as
Disabled and requires configuration by the user.
Steps
Download the
openmanage_enterprise_ovf_format.zip file from the Dell support site and extract the file to a location accessible by VMware vSphere Client. It is recommended to use a local drive or CD/DVD, because installing from a network location can take up to 30 minutes.
On the
Virtual Machines screen, click
Create/Register VM.
The
New virtual machine wizard opens.
On the
Select creation type screen, click
Deploy a virtual machine from an OVF or OVA file. Click
Next.
On the
Select OVF and VMDK files screen, set the name of the virtual machine. Drag the downloaded files onto the screen or click on the screen to upload all three extracted files. Click
Next.
On the
Deployment options screen, set
Disk provisioning to
Thick to pre-allocate physical storage space to VMs at the time a drive is created. Click
Next.
On the
Ready to complete screen, review your settings selection. Click
Finish.
A completion status window is displayed where you can track job progress. Once the job completes, the VM will be booted up.