- Notes, cautions, and warnings
- Important information about Microsoft Windows Server 2016
- iDRAC, BIOS, system firmware, RAID controller driver versions
- Systems Management support for Microsoft Windows Server 2016
- Multilingual operating system media for Windows Server 2016
- Pre-Installed Virtual Machine
- Retrieving Integrated Dell Remote Access Controller (iDRAC) IP address
- Operating system support matrix for Dell PowerEdge servers
- Known Issues
- Administrative template errors occur when starting local group policy editor
- I/O errors or unresponsive virtual machines
- Cluster VD errors logged during I/O operation
- Bus type of NVDIMMs displayed as Unknown
- Windows Blue Screen error while booting from iSCSI target and Intel i350 initiator
- Drivers without inbox support
- Operating system name is displayed incorrectly
- Unable to convert Windows Server Core to OS with Desktop Experience
- Unable to boot into Windows Server 2016 if Host Guardian Hyper-V Support or Device Guard is enabled on PERC H330
- When NVMe device is attached to a running VM, the device is not enumerated
- Unable to modify or create TPM password, system displays error message
- Getting help
Microsoft Windows Server 2016 for Dell PowerEdge Systems Important Information Guide
Windows Blue Screen error while booting from iSCSI target and Intel i350 initiator
- Description:
- Using Windows 2016 in-box Intel iSCSI drivers for boot from the iSCSI target, an error is encountered: STOP 0x7B Inaccessible Boot Device Blue Screen while booting from Intel i350-t Adapter initiator. This issue is limited to the in-box Intel i350 driver in the Windows 2016 operating system installation media images.
- Workaround:
- Dell EMC has released a new out of the box Intel i350 driver package that carries the fix for this issue. Download the drivers from the Dell support site for your respective server. By performing the following steps, you can manually choose Intel iSCSI driver during the Windows installation:
- Unzip the files from the Network_Driver_3PT51_WN64_18.0.0_A00.exe Dell Update Package (DUP) to a USB thumb drive by running following command from an elevated command prompt:
Network_Driver_XXXXX_WN64_XX.X.X_A00.exe /s /drivers=C:\mydir
- Click Load Driver and choose the new driver from the USB drive that you had unzipped.
- Complete the installation using this new driver.
For detailed information, see Windows Blue Screen booting from iSCSI Target and Intel i350 Initiator.
- Unzip the files from the Network_Driver_3PT51_WN64_18.0.0_A00.exe Dell Update Package (DUP) to a USB thumb drive by running following command from an elevated command prompt:
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\