Dell Precision Tower 5810/7810/7910 and Rack 7910 Serial PCIe-Card Setup Guide

Jumper Setting on a Serial PCIe-Card

• The setting 1-2 will provide a 5V Power Serial port.
• The setting 3-4 will provide a Standard Serial port.
• The setting 5-6 will provide a 12V Power Serial port.
• Default is a standard serial port (3-4).

1. Install serial card software before installing the Add-In-Card (AIC).
   NOTE: To download the drivers for install on both Windows operating system and Linux operating system, go to dell.com/support.
2. For Precision Tower 7910: the Serial AIC is placed in the slots CPU1-1, CPU1-3, CPU1-4, CPU2-1, CPU2-2.
3. For Precision Tower 5810/Tower 7810: the Serial AIC is placed in slot 1, 3, 4, 5.