Dell G5 15 Service Manual

Procedure

Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
Connect the interposer to the hard-drive assembly.
Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
Replace the four screws (M2.5x3+3) that secure the hard-drive assembly to the computer base.
Adhere the hard-drive cable to the computer base.
Slide the hard-drive cable into the connector on the system board and close the latch to secure the hard-drive cable.