iDRAC 8/7 v2.30.30.30 User’s Guide

                                    option myname code 43 = text;
                                    subnet 192.168.0.0 netmask 255.255.0.0  {
                                    #default gateway
                                    	option routers			192.168.0.1;
                                    	option subnet-mask		255.255.255.0;
                                    	option nis-domain		"domain.org";
                                    	option domain-name		"domain.org";
                                    	option domain-name-servers	192.168.1.1;
                                    	option time-offset		-18000;	# Eastern Standard Time
                                    	
                                    option vendor-class-identifier "iDRAC";
                                       	set vendor-string = option vendor-class-identifier;
                                       	option myname "-f system_config.xml -i 192.168.0.130 -u user -p password -n cifs -s 2 -d 0 -t 500";
                                    
                                    	range dynamic-bootp 192.168.0.128 192.168.0.254;
                                    	default-lease-time 21600;
                                    	max-lease-time 43200;
                                    		}
                                    }
                                 

• Filename (–f) — Indicates the name of the exported Server Configuration Profile XML file. Specifying the filename is optional with iDRAC version 2.20.20.20 or later.
  • NOTE: For more information on file naming rules, see Configuring servers and server components using Auto Config .
• Sharename (-n) — Indicates the name of the network share.
• ShareType (-s) — Indicates the share type. 0 indicates NFS and 2 indicates CIFS.
• IPAddress (-i) — Indicates the IP address of the file share.
  • NOTE: Sharename (-n), ShareType (-s), and IPAddress (-i) are required attributes that must be passed.
• Username (-u) — Indicates the user name required to access the network share. This information is required only for CIFS.
• Password (-p) — Indicates the password required to access the network share. This information is required only for CIFS.
  • NOTE: Example for Linux NFS and CIFS share:
    • NFS:   -f system_config.xml -i 192.168.0.130 -n /nfs -s 0 -d 0 -t 500
    • CIFS:  -f system_config.xml -i 192.168.0.130 -n sambashare/config_files -s 2 -u user -p password -d 1 -t 400
    Ensure that you use NFS2 or NFS3 for NFS network share
• ShutdownType (-d) — Indicates the mode of shutdown. 0 indicates Graceful shutdown and 1 indicates Forced shutdown.
  • NOTE: The default setting is 0.
• Timetowait (-t) — Indicates the time the host system waits before shutting down. The default setting is 300.
• EndHostPowerState (-e) — Indicates the power state of the host. 0 indicates OFF and 1 indicates ON. The default setting is 1.
  • NOTE: ShutdownType (-d), Timetowait (-t), and EndHostPowerState (-e) are optional attributes.

host my_host {

hardware ethernet b8:2a:72:fb:e6:56; 

  fixed-address 192.168.0.211; 

option host-name "my_host";

 option myname " -f r630_raid.xml -i 192.168.0.1 -n /nfs -s 0 -d 0 -t 300";

}